QIMT Glossary



Definitions of Metrology terms & phrases.

If you know of a term or phrase that belongs here, you can submit the term or phrase and associated definition by adding an entry. NOTE: All entries are reviewed and approved prior to being seen by others on the site.


Procedure for adding a Definition:

  1. Click on the "Add a New Entry" button.
  2. Under the first required field labeled 'Concept', enter the Metrology word or term.
  3. In the 'Description' Field, put the definition, don't forget to use the "DeWord" button to remove MS Word formatting if you are copying and pasting from MS Word; see lounge forum for note regarding this issue.
  4. Ignore the other entries and submit.


You can browse using the alphabet, or find a definition by searching for any term, or by any text within the definition itself. Or click on ALL to see all the posted definitions.

You can also start discussions by 'commenting' on a definition.cool

Use the little icon in the corner of the quote to comment.

Browse the glossary using this index

Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL

Page:  1  2  (Next)
  ALL

I

IEC

International Electrotechnical Commission.

ILAC

International Laboratory Accreditation Coorperation

Indication (of a measuring instrument)

Value of a (measurable) quantity provided by a measuring instrument.

Influence quantity

Quantity that is not the measurand (quantity subject to measurement) but that affects the result of the measurement.

Instrument constant

Coefficient by which the direct indication of a measuring instrument must be multiplied to give the indicated value of the measurand or be used to calculate the value of the measurand.

International (measuring) standard

Standard recognised by international agreement as suitable for international use as a basis for determining the value of other standards for a given magnitude.

IPQ

Instituto Português da Qualidade, the national metrological institute of Portugal.

IRMM

Institute for Reference Materials and Measurements, Joint Research Centre under the European Commission.

ISO

International Organisation for Standardisation.

ISO/IEC 17025

ISO/IEC 17025 is the main standard used by testing and calibration laboratories. Originally known as ISO/IEC Guide 25, ISO/IEC 17025 was initially issued by the International Organization for Standardization in 1999. There are many commonalities with the ISO 9000 standard, but ISO/IEC 17025 adds in the concept of competence to the equation. And it applies directly to those organizations that produce testing and calibration results.

Since its initial release, a second release was made in 2005 after it was agreed that it needed to have its quality system words more closely aligned with the 2000 version of ISO 9001...for more info...CLICK HERE.

ISO/IEC17025


IUPAP

The International Union of Pure and Applied Physicists


Page:  1  2  (Next)
  ALL